Join our mailing list!






  Home > Arcade Parts > Arcade PCB's >

I-PAC-4 Arcade PCB Board
I-PAC-4 - 4 Player Arcade PCB Board


 
Our Price: $66.49


Availability:: Subject to availability
Product Code: UM-I-PAC-4
Qty:

Description
 

I-PAC-4 - 4 Player Arcade PCB Board


We are sorry, however we are unfortunately sold out of this particular product.
• 65 Keyboard Encoded Imputs.

•I-PAC The world's most advanced PC interface for buttons and joysticks.
• Full Speed USB 2.0. 32 Inputs. Upgradeable Firmware.
• Also still supports PS/2 keyboard interface.
• Has up to 56 inputs each with it's own dedicated microprocessor pin. No interaction or delays, vital for multi-button games such as fighting games.
• Emulates a USB keyboard (and PS/2) and yet breaks through the USB simultaneously-pressed-switch limit of 6 switches (plus ctrl,alt,shift) which afflicts all USB keyboard devices. This is beacuse it has inbuilt full native USB support, and does not rely on an add-on adaptor.
• Fully multi-processed interrupt-driven (so no loss of performance) pass-through connector so that an attached keyboard (or a second encoder) is handled in PS/2 mode with full byte interleaving rather than being switched on/off.
• Can be programmed either with or without host software. Even without special host software, the I-PAC can still display programming steps and current settings, so no working "blind".
• Allows shift function which allows ANY input to be assigned to a shifted secondary keycode and the shift button can have it's own function too so no need for a dedicated extra control panel button.
• Has a self-test LED which not only gives an instant visible check of your installation but also can indicate which connection (if any) is causing a problem.
• Supports Volume up/down, MOUSE left/right buttons, power, sleep and wake functions.
• Retains it's programming after power off.
• Uses a high-performance microcontroller chip . No matrix or diodes are used hence absolutely no ghosting, blocking or delays.

• De-bounce. This uses a state counter method. Each input has it's own counter. This means simultaneous keypresses are never locked out.
• Key code Flash ROM storage. Retains custom settings after power off/on (excluding I-PAC VE)
Dual Interface.
• Auto-detects which type of connection is being used and switches accordingly between USB and PS/2 (PC keyboard interface).
• Full Speed USB 2.0 compatible.
• Keyboard pass-through driver consists of a bit level and byte level state machine. Driven by interrupts so no wasted CPU power when not being used.
Shift key logic including protection against stuck keys.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Arcade Parts > Arcade PCB's